865 PRO PTZ PoE Extender Kit Includes the Following:

  • (2) 865 PRO PTZ PoE+ IEEE 802.3at units
  • 2-Pair High Power PoE+ to support Axis P-Series PTZ Cameras
  • (2) 10′ Black Ethernet patch cords
  • (1) Country specific switching wall power adapter for CO
  • (1) 360 60W – 56V PoE+ Injector

World’s only PoE Extender solution to extending the IEEE Ethernet distance limitations for Extended Networks and High Power PoE – the 865 PRO PTZ PoE Extender allows for the simple and robust installation of a high powered PoE device up to 1,500 ft (458m) from your LAN/power source. These units provide full duplex bandwidth up to 100MB/s over CAT3 or better cabling as well as the use of standalone PoE injectors.

  • Longest warranty protection included exceeding any knockoff Chinese competitors.
  • Broadband Technology that delivers extended Ethernet & PoE over existing 2-pair telephone wiring or better up to 1,500ft (458m). This means no new wiring is required
  • Provides one scalable infrastructure for PoE, Ethernet data
  • Quick install RJ-45 connection to infrastructure.
  • Quad LAN ports on each end to eliminate the need for LAN switches.

MSRP $699.00    CART $560.00

Add to Cart

Product Description

With the ability to support the use of PoE injectors natively, full duplex capabilities up to 100MB/s over CAT3 cabling (or better), and superior, AMERICAN, engineering, the 865 PRO PTZ PoE Extender is the only product of its type in the world. The 865PTZ is a complete solution for Extended Network and High Power PoE, with the capability to exceed the IEEE distance limitation to up to 1,500 ft (458m) from your LAN and power source. The 865 PRO PTZ is ideal for installing PoE IP security cameras and PoE WiFi Access Points with high power requirements.

With the distance limits of the 865 PRO PTZ PoE Extender exceeding the normal limits by over 300%, there is no worthwhile substitute to our American design and expertise.

Made in the USA with quality and pride - the only manufacturer to do so in this industry.

To provide the greatest hedge against changing technologies, the 865 PRO PTZ, in addition to being designed to mitigate the challenges of modern and switched Local Area Networks, is able to add features and capabilities as your network expands.

Key Features

  • Extended Ethernet with Power over Ethernet(PoE+) on 2 pair existing Telephone wiring or Category rated wiring.
  • IEEE 802.3at PoE+ is delivered on pins 1/2/4/5 - positive power and on pins 3/6/7/8 - negative power
  • Optimized for Axis P Series PTZ cameras
  • Rapid LAN style installation RJ45 jacks - no programming required.
  • High Power PoE+ PTZ Camera support
  • Network Equipment independence - Transparent to protocols, applications and MAC addresses.
  • Sustained 100Mbps full-duplex service delivery end to end.


CO unit - 5v/2A DC country specific AC switching wall adapter included. (120-260VAC)
CPE unit - remote self powered uses 5v and passes remaining PoE budget to end PoE device

Data Rate
100Mbps full-duplex Ethernet Data.3at).

Ethernet: (4) LAN RJ-45 Standard 10/100 Base-TX autosensing ports
Interlink: RJ-45 (4-Pair)

Height 1.5" (38mm) Depth 3.75" (95 mm) Width 5.75" (146mm)

Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing

Ruggedized wall mount black Aluminum casing Optimized for heat extraction and isolation without fans.

Product Data SheetProduct Manual
Enable-IT 865 PRO PTZ PoE Extender datasheetEnable-IT 865 PRO PTZ PoE Extender manual

Enable-IT 865PTZ PRO PoE Extender

865 PRO PTZ (Pan/Tilt/Zoom) PoE Extender was last modified: August 31st, 2014 by PoE Extender