Enable-IT-360-61W-56V-IEEE-802.3AT-Gigabit-Power-Over-Ethernet-Midspan-Injector

56V – 61W Gigabit High Power PoE Injector

$80.00

Product Description

The EnableIT 360 56V – 61W Gigabit High Power PoE Injector is single port IEEE 802.3af/at compliant Midspan solution that is a compact and easy to install. It support LAN speeds of 10 / 100 and Gigabit throughput. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera, PoE Access controls, PoE IP Phones or other PoE powered equipment. It eliminates the need for a remote end external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The 360 PoE Injector unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af/at compliant device, the 56V – 61W Gigabit PoE Injector supports 2-pair or 4-pair PoE output. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring. If you need to reduce DC Voltage you can use an EnableIT 324 PoE Reducer or for extending your PoE, use with a PoE Extender.

Made in the USA with quality and pride – the only manufacturer to do so in this industry.

SKU: EnableIT 360 Category:

Description

Enable-IT-360-61W-56V-IEEE-802.3AT-Gigabit-Power-Over-Ethernet-Midspan-Injector
Gigabit PoE Injector Kit Includes the Following:

  • (1) EnableIT 360 56V – 61W Gigabit High Power PoE Injector
  • (1) 10′ Black Ethernet patch cord
  • (1) Country Specific VAC power cord
  • (1) EnableIT 360 Gigabit PoE Injector Quickstart Guide
  • (1) Same Day Flat Rate Shipping

This PoE Injector is ideal for any standard 803.3at 56V or lower PoE Camera, PoE IP Phone, Poe Access control and WiFi Access Point installations.

  • Built in Auto-Recovery, Over-Voltage
  • FCC Part 15 Class B & EN55022 Class B
  • Short Circuit protection for your valuable PoE electronics
  • Max Throughput: 1 Gigabit per second
  • AC Input (90 – 264V)
  • Height 1.5″ (38mm) Depth 3″ (76mm) Width 2″ (51mm)
  • Free Ground Shipping or Low cost Flat Rate 2nd Day / Overnight

MSRP $80.00

Add to Cart

error parsing slider shortcode

Product Description

The EnableIT 360 56V - 61W Gigabit High Power PoE Injector is single port IEEE 802.3af/at compliant Midspan solution that is a compact and easy to install. It support LAN speeds of 10 / 100 and Gigabit throughput. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera, PoE Access controls, PoE IP Phones or other PoE powered equipment. It eliminates the need for a remote end external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The 360 PoE Injector unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af/at compliant device, the 56V - 61W Gigabit PoE Injector supports 2-pair or 4-pair PoE output. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring. If you need to reduce DC Voltage you can use an EnableIT 324 PoE Reducer or for extending your PoE, use with a PoE Extender.

Made in the USA with quality and pride - the only manufacturer to do so in this industry. [tab icon="" title="Product Description"]

Product Description

The EnableIT 360 56V - 61W Gigabit High Power PoE Injector is single port IEEE 802.3af/at compliant Midspan solution that is a compact and easy to install. It support LAN speeds of 10 / 100 and Gigabit throughput. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera, PoE Access controls, PoE IP Phones or other PoE powered equipment. It eliminates the need for a remote end external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The 360 PoE Injector unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af/at compliant device, the 56V - 61W Gigabit PoE Injector supports 2-pair or 4-pair PoE output. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring. If you need to reduce DC Voltage you can use an EnableIT 324 PoE Reducer or for extending your PoE, use with a PoE Extender.

Made in the USA with quality and pride - the only manufacturer to do so in this industry. [/tab] [tab icon="" title="Key Features"]

Key Features

  • Built in Auto-Recovery, Over-Voltage
  • FCC Part 15 Class B & EN55022 Class B
  • Short Circuit protection for your valuable PoE electronics
  • Max Throughput: 1 Gigabit per second
  • Global AC Input (90V – 264V)
  • High Power DC Output (56V - 61W)
[/tab] [tab icon="" title="Specifications"]

Specifications

Power

48VDC - 21W Gigabit High Power PoE Injector - AC Input (90V - 264V)

Data Rate

10/100/1000Mbps full-duplex Ethernet Data

Interface

Ethernet: (2) LAN RJ-45 Standard 10/100/1000Base-TX ports

Dimensions

Height 1.4" (35mm) Depth 2" (51mm) Width 3" (76mm)

Environment

Operational Temperature: -49°F to 168°F (-45°to 76°C)

Humidity: 5% to 95%, non-condensing

[/tab] [tab icon="" title="Downloads"]
Product Data SheetProduct Manual
56V – 61W Gigabit High Power PoE Injector 156V – 61W Gigabit High Power PoE Injector 1
[/tab] [tab icon="" title="Diagrams"]

56V – 61W Gigabit High Power PoE Injector 3< [/tab] [/tabs]

56V – 61W Gigabit High Power PoE Injector was last modified: July 7th, 2016 by PoE Extender